本文へ移動します

茅原 崇徳

氏 名茅原 崇徳チハラ タカノリちはら たかのり
職 位助教
所 属首都大学東京システムデザイン学部 経営システムデザインコース
システムデザイン研究科 経営システムデザイン学域
 
専門・研究分野設計工学,人間工学
最終学歴・学位金沢大学大学院自然科学研究科博士後期課程修了 博士(工学)
研究テーマ・使いやすさや快適性の定式化とその最適設計
・複数の生体信号を用いた身体負担の総合評価法
・身体負担の個人差の定量的評価
研究キーワード設計工学,人間工学,最適設計
研究業績・著書・
論文、その他
それに準じる業績
【原著論文】

・Chihara, T., Seo, A., Optimal design method with biomechanical analysis for a work environment reducing physical workload: Illustration by application to work table height design, Theoretical Issues on Ergonomics Science, Accept

・森島圭祐,大本浩司,茅原崇徳,山中仁寛,眼球・頭部協調運動と有効視野の関係,日本経営工学会論文誌,Vol.67,No.3,pp.252-260,2016.10

・Chihara, T., Nozawa, A., Seo, A., Formulation of perceived muscle fatigue based on elbow flexion task, Mechanical Engineering Journal, Vol.3, No.4, DOI: 10.1299/mej.15-00740, 2016.8

・Chihara, T., Nishijima, U., Moriya, I., Seo, A., Hatano, H., Yamada, H., Optimum design of a lumber support belt to reduce the physical workload of the low back, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.10, No.1, DOI: 10.1299/jamdsm.2016jamdsm0012, 2016.3

・Chihara, T., Hoshi, S., Seo, A., Formulation of total perceived discomfort function for entire body in sagittal plane based on joint moment, Innovation and Supply Chain Management, Vol.9, No.3, pp.75-82, 2015.9

・茅原崇徳,保志沙那子,瀬尾明彦,作業姿勢に関する個人差のクラスタリング手法の提案と物体保持姿勢への適用,人間工学, Vol.51, No.4, pp.256-264, 2015.8

・Chihara, T., Fukuchi, N., Seo, A., Optimum position and orientation of handrail for sit-to-stand movement, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.9, No.3, DOI: 10.1299/jamdsm.2015jamdsm0036, 2015.8

・西島麗,幅舘勇介,畑野裕一,山田裕之,岩嵜徹治,茅原崇徳,瀬尾明彦,腰部ベルトの装着が作業姿勢に与える影響,人間工学, Vol.51, No.2, pp.115-122, 2015.4

・茅原崇徳,大山修斗,瀬尾明彦,握りやすさの向上を目的とした把持物体の形状最適設計,日本機械学会論文集, Vol.80, No.820, DOI:10.1299/transjsme.2014dsm0391, 2014.12

・Chihara, T., Seo, A., Izumi, T., Total perceived discomfort function for upper limbs based on joint moment, Journal of Advanced Simulation in Science and Engineering, Vol.1, No.1, pp.36-50, 2014.10

・Chihara, T., Izumi, T., Seo, A., Perceived discomfort functions based on joint moment for various joint motion directions of the upper limb, Applied Ergonomics, Vol.45, No.2, Part B, pp.308-317, 2014.3

・Chihara, T., Seo, A., Evaluation of multiple muscle loads through multi-objective optimization with prediction of subjective satisfaction level: Illustration by an application to handrail position for standing, Applied Ergonomics, Vol.45, No.2, Part B, pp.261-269, 2014.3

・茅原崇徳,和泉大樹,瀬尾明彦,関節モーメントに基づく上肢の主観的負担感の定式化おける関節角度の影響,人間工学, Vol.49, No.5, pp.211-218, 2013.10

・肥田拓哉,茅原崇徳,瀬尾明彦,目視検査作業における検査速度と検査経路が上肢負担に与える影響,日本経営工学会論文誌, Vol.64, No.1, pp.1-8, 2013.4

・茅原崇徳,大山修斗,瀬尾明彦,個人差への対応を考慮した人間工学的設計問題の定式化,日本機械学会論文集C編, Vol.79, No.799, pp.800-813, 2013.3

・肥田拓哉,茅原崇徳,瀬尾明彦,目視検査作業における検査対象物の大きさと把持位置が上肢負担に与える影響,日本経営工学会論文誌, Vol.63, No.4, pp.217-224, 2013.1

・茅原崇徳,肥田拓哉,南博貴,瀬尾明彦,筋電図と関節角度に基づく作業負担の総合評価法に関する基礎的検討,人間工学, Vol.48, No.5, pp.244-254, 2012.10

・Chihara, T., Yamazaki, K., Evaluation function of drinking ease from aluminum beverage bottles relative to optimum bottle opening diameter and beverage type, Applied Ergonomics, Vol.43, No.1, pp.157-165, 2012.1

・肥田拓哉,茅原崇徳,瀬尾明彦,把持対象物の形状と作業面の高さが上肢負担に与える影響,日本経営工学会論文誌, Vol.62, No.5, pp.222-229, 2011.12

・茅原崇徳,和泉太樹,瀬尾明彦,筋負担の総合評価に基づく人間工学的設計法に関する検討(第2報,妥協解群の提示による設計者の意思決定支援),日本機械学会論文集C編, Vol.77, No.780, pp.3104-3116, 2011.8

・茅原崇徳,瀬尾明彦,筋負担の総合評価に基づく人間工学的設計法に関する基礎的検討,日本機械学会論文集C編, Vol.77, No.776, pp.1477-1490, 2011.4

・茅原崇徳,広幡哲志,山崎光悦,アルミボトル口径最適化のための開けやすさ評価関数の提案,人間工学, Vol.46, No.2, pp.127-135, 2010.4

・Chihara, T., Yamazaki, K., Itoh, R., Han, J., Evaluation of drinking ease relative to the opening diameter and beverage type of aluminum beverage bottles, Journal of Food Engineering, Vol.95, No.2, pp.264-271, 2009.11

・茅原崇徳,山崎光悦,アルミボトル口径の飲みやすさ評価法に関する基礎的検討(第2報,飲みやすさ評価関数の提案),日本機械学会論文集C編, Vol.75, No.755, pp.2051-2058, 2009.7

・茅原崇徳,山崎光悦,伊藤隆一,アルミボトル口径の飲みやすさ評価法に関する基礎的検討,日本機械学会論文集C編, Vol.74, No.737, pp.134-141, 2008.1


【解説論文】

・茅原崇徳,瀬尾明彦,山崎光悦,最適化の考え方に基づく身体負担の定式化と人間工学的設計への応用,設計工学, Vol.47, No.7, pp.326-332, 2012.7


【国際会議】

・Hiranai, K., Chihara, T., Seo, A., Effect of viewing condition of head-mounted display on working posture and physical work load, The Thirteenth International Conference on Industrial Management, pp.721-727, Hiroshima, Japan, September 21-23, 2016

・Goya, A., Chihara, T., Seo, A., Effect of verbal instructions on physical work load during picking tasks, The Thirteenth International Conference on Industrial Management, pp.715-720, Hiroshima, Japan, September 21-23, 2016

・Nozawa, A., Chihara, T., Seo, A., Evaluation of perceived muscle fatigue due to repetitive elbow holding task, The Thirteenth International Conference on Industrial Management, pp.710-714, Hiroshima, Japan, September 21-23, 2016

・Chihara, T., Seo, A., Optimal design method of work environment with biomechanical analysis for a work environment reducing physical workload, Asian Congress of Structural and Multidisciplinary Optimization 2016, Paper No.3D3-4, Nagasaki, Japan, May 22-26, 2016

・Chihara, T., Hoshi, S., Seo, A., Function approximation model for prediction of total perceived discomfort considering differences of discomfort characteristics depending on body part, 19th Triennial Congress of the International Ergonomics Association, Paper No.158, Melbourne, Australia, August 9-14, 2015

・Ohtsuka, R., Wang, J., Chihara, T., Yamanaka, K., Morishima, K., Daimoto, H., Estimation of mental workload during motorcycle operation, 6th International Conference on Applied Human Factors and Ergonomics, Paper No.E-15, Las Vegas, Nevada, USA, July 26-30, 2015

・Morishima, K., Ura, H., Chihara, T., Daimoto, H., Yamanaka, K., Estimation of useful field of view by machine learning on parameters related to eye movements, 10th Pan-Pacific Conference on Ergonomics, Tokyo, Japan, August 25-29, 2014

・Chihara, T., Ohyama, S., Seo, A., Shape Optimization of Grasped Object for Improving Ease of Grasping, 8th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Paper No.0123, Gyeongju, Korea, May 25-29, 2014

・Chihara,T., Seo, A., Proposal of Function Approximation Model for Prediction of Total Perceived Discomfort on Upper Limb, JSST 2013 International Conference on Simulation Technology, Paper No.121, Tokyo, Japan, September 11-13, 2013 (in USB flash memory)

・Chihara, T., Izumi, T., Seo, A., Selection of Approximation Model on Total Perceived Discomfort Function for the Upper Limb base on Joint Moment, The Institute of Industrial Engineering Asian Conference 2013, pp.197-204, Taipei, Taiwan, July 18-20, 2013 (in CD-ROM)

・Ishii, M., Minochi, A., Yamanaka., K., Chihara, T., Evaluation of mental workload based on pursuit eye movement, 2013 International Conference on Biometrics and Kansei Engineering, pp.121-124, Tokyo, Japan, July 5-7, 2013 (in CD-ROM)

・Chihara, T., Seo, A., Ergonomic Design Method for Optimization of Comprehensive Muscle Load based on the Minimization of Regret, 7th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Paper No.J-086, Huangshan, China, June 18-22, 2012 (in CD-ROM)

・Chihara, T., Seo, A., Comprehensive Evaluation of Muscle Load by Appling Multi-objective Optimization, 9th World Congress on Structural and Multidisciplinary Optimization, Paper No. 075_1, Shizuoka, Japan, June 13-17, 2011

・Chihara, T., Yamazaki, K., Sobajima, S., Han, J,. Development of Evaluation Function for Openability of Opening Diameter of Aluminum Beverage Bottles and Its Application to Optimum Design, 13th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Paper No.AIAA-2010-9044, Fort Worth, Texas, USA, September 13-15, 2010

・Chihara, T., Yamazaki, K., Sobajima, S., Han, J., Evaluation Function of Openability Relative to Optimum Opening Diameter of Aluminum Beverage Bottles and Gripping Postures, the 2010 Asian Conference on Design & Digital Engineering, pp.149-152, Jeju, Korea, August 25-28, 2010

・Chihara, T., Hirohata, S., Yamazaki, K., Evaluation Method of Openability Related to Optimum Opening Diameter of Aluminum Beverage Bottles, 6th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Paper No.J-45, Kyoto, Japan, June 22-25, 2010 (in CD-ROM)

・Chihara, T., Yamazaki, K., Evaluation Function of Openability Relative to Optimum Opening Diameter of Aluminum Beverage Bottles, Design Engineering Workshop 2009 (The 9th Japan-Korea Design Engineering Workshop), pp. 99-102, Okinawa, Japan, October 26-27, 2009

・Hirohata, S., Yamazaki, K., Chihara, T., Evaluation on Optimal Opening Diameter of Aluminum Beverage Bottle with Screw Cap for Openability, 8th World Congress on Structural and Multidisciplinary Optimization, Paper No. 1287, Lisbon, Portugal, June 1-5, 2009 (in CD-ROM)

・Chihara, T., Yamazaki, K., A Study on Optimal Opening Diameter of Aluminum Beverage Bottles for Drinking Ease (Comparison between Beverage Type and Discussion), 8th World Congress on Structural and Multidisciplinary Optimization, Paper No. 1147, Lisbon, Portugal, June 1-5, 2009 (in CD-ROM)

・Chihara, T., Yamazaki, K., Itoh, R.,Evaluation Method on Drinking Ease of Opening Diameter for Aluminum Beverage Bottle (A proposal on evaluation function of drinking ease), 9th Southeast Asian Ergonomics Society Conference, Paper No.C82, Bangkok, Thai, October 21-24, 2008 (in CD-ROM)

・Chihara, T., Yamazaki, K., Itoh, R., Evaluation Method on Drinking Ease of Opening Diameter for Aluminum Beverage Bottle (A Proposal on Evaluation Function and Its Optimization), 5th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Paper No.J025, Jeju, Korea, June 16-18, 2008

・Yamazaki, K., Chihara, T., Itoh, R., Han, J., Nishiyama, S., Evaluation Method of Drinking Ease for Aluminum Beverage Bottles, ASME 2007 International Design Engineering Technical Conferences & Design Automation Conference, Paper No.35637, Las Vegas, Nevada, USA, September 4-7, 2007 (in CD-ROM)

・Chihara, T., Yamazaki, K., Itoh, R., Han, J., Nishiyama, S., Evaluation Method of Drinking Ease of Opening Diameter for Aluminum Beverage Bottles, Design Engineering Workshop 2007 (7th IJCC Japan-Korea CAD/CAM Workshop), pp.124-128, Tokyo, Japan, July 26-27, 2007
受 賞・10th PPCOE, Best Paper Award(2014年8月)
・CJK-OSM8, Young Scientist Award(2014年5月)
・日本機械学会,日本機械学会奨励賞(研究) (2014年4月)
・日本人間工学会,研究奨励賞(2013年6月)
・日本機械学会 設計工学・システム部門,奨励業績表彰(2011年10月)
・日本設計工学会 北陸支部,奨励賞(2007年6月)
・日本機械学会,三浦賞(2007年3月)
・日本機械学会,畠山賞(2005年3月)
主な学会活動日本機械学会,日本人間工学会,日本設計工学会
社会等との関わり・金沢大学 理工学域 非常勤講師(2012年度〜2014年度,2016年度)
個人のURL
担当科目
  • 経営システム実験II
  • 応用人間工学演習
  • 経営システム基礎実験
オフィスアワー
研究室日野キャンパス3号館202号室
内線番号内線
メールアドレス変換画像
(メールを送信される場合は●を@に変換してください)
研究室サイト等
取組状況平成27年度
researchmap
取組成果
ページトップへ